Ocean-optics Fiber Optic Termination Kit Manual de usuario descargar pdf (Pagina 5)

Fiber Optic Termination Kit Instructions

637-03500-000-01-201105 5

Inspecting the Fiber End

► Procedure

Perform the steps below to inspect the condition of the fiber after polishing:

1. Ensure that the 9025 SMA Scope Adapter is attached to the inspection scope.

2. Connect the SMA connector and fiber to be examined to the SMA adapter on the end of the

inspection scope.

3. Turn the inspection scope’s light on.

4. Look through the end of the inspection scope to verify the condition of the fiber. If there are

no visible cracks, grooves, or scuffs on the fiber surface, the fiber polishing procedure is

complete.

If you locate cracks, grooves, scuffs, or other imperfections on the fiber surface, repeat Steps

7-10 of the

Polishing the Fiber End section (above), then re-examine the condition of the fiber

after repolishing.

Accessories

You can greatly enhance the potential uses of the Fiber Optic Termination Kit by purchasing any of

the following Ocean Optics products:

Product Part No. Description

Fiber Tinkerer Kit FT-KIT Includes an assortment of randomly selected UV-VIS

and VIS-NIR optical fibers. Each kit has at least 1 meter

of consecutive length of each fiber type.

Bare Fiber Adapter Kit BFA-KIT Includes six SMA 905 Connectors of various sizes and a

connect-and-release adapter to fasten the SMA

connectors onto bare optical fiber.

SMA Connector

Supplies

Connector Kit The SMA 905 Connector Kits are available in six

different sizes, each with 10 SMA 905 Connectors of the

same size, drilled for precise alignment with our optical

fiber. Kits vary according to the diameter size of the

SMA 905 Connector and whether you prefer Standard

SMA 905 connectors or Premium SMA 905 connectors:

150 µm, 270 µm, 380 µm, 490 µm, 710 µm and

1300 µm diameter connectors are available.

Fibers See

http://www.oceanoptics.com/products/opticalfibers.asp

for our available fibers.

View any of these products at http://www.oceanoptics.com/products/fiberkits.asp or contact an

Ocean Optics Application Sales Engineer for assistance.

1 2 3 4 5 6

Sin comentarios

Ocean-optics Fiber Optic Termination Kit Manual de usuario Pagina 5